## Process this file with automake to produce Makefile.in
+SUBDIRS = tutorial reference
NM = @NM@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
+REFERENCE_TARGETS = @REFERENCE_TARGETS@
+TUTORIAL_TARGETS = @TUTORIAL_TARGETS@
VERSION = @VERSION@
YACC = @YACC@
+
+SUBDIRS = tutorial reference
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = ../config.h
CONFIG_CLEAN_FILES =
TAR = tar
GZIP = --best
-all: Makefile
+all: all-recursive all-am
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_builddir) \
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ target=`echo $@ | sed s/-recursive//`; \
+ echo "Making $$target in $$subdir"; \
+ (cd $$subdir && $(MAKE) $$target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+ rev="$$subdir $$rev"; \
+ done; \
+ for subdir in $$rev; do \
+ target=`echo $@ | sed s/-recursive//`; \
+ echo "Making $$target in $$subdir"; \
+ (cd $$subdir && $(MAKE) $$target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ (cd $$subdir && $(MAKE) tags); \
+ done
+
tags: TAGS
-TAGS:
+ID: $(HEADERS) $(SOURCES) $(LISP)
+ here=`pwd` && cd $(srcdir) \
+ && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ done; \
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+ -rm -f TAGS ID
+
+maintainer-clean-tags:
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file; \
done
-info:
-dvi:
-check: all
- $(MAKE)
-installcheck:
-install-exec:
+ for subdir in $(SUBDIRS); do \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ chmod 777 $(distdir)/$$subdir; \
+ (cd $$subdir && $(MAKE) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
+ || exit 1; \
+ done
+info: info-recursive
+dvi: dvi-recursive
+check: all-am
+ $(MAKE) check-recursive
+installcheck: installcheck-recursive
+all-am: Makefile
+
+install-exec: install-exec-recursive
@$(NORMAL_INSTALL)
-install-data:
+install-data: install-data-recursive
@$(NORMAL_INSTALL)
-install: install-exec install-data all
+install: install-recursive
@:
-uninstall:
+uninstall: uninstall-recursive
install-strip:
$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
-installdirs:
+installdirs: installdirs-recursive
mostlyclean-generic:
maintainer-clean-generic:
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-mostlyclean: mostlyclean-generic
+mostlyclean-am: mostlyclean-tags mostlyclean-generic
+
+clean-am: clean-tags clean-generic mostlyclean-am
+
+distclean-am: distclean-tags distclean-generic clean-am
+
+maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
+ distclean-am
+
+mostlyclean: mostlyclean-recursive mostlyclean-am
-clean: clean-generic mostlyclean
+clean: clean-recursive clean-am
-distclean: distclean-generic clean
+distclean: distclean-recursive distclean-am
-rm -f config.status
-rm -f libtool
-maintainer-clean: maintainer-clean-generic distclean
+maintainer-clean: maintainer-clean-recursive maintainer-clean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
-.PHONY: tags distdir info dvi installcheck install-exec install-data \
-install uninstall all installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
+.PHONY: install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info dvi \
+installcheck all-am install-exec install-data install uninstall all \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# If a relative path is entered, it will be relative to the location
# where doxygen was started. If left blank the current directory will be used.
-OUTPUT_DIRECTORY = ./doc
+OUTPUT_DIRECTORY = .
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
# documentation generated by doxygen is written. Doxygen will use this
# generated by doxygen. Possible values are YES and NO. If left blank
# NO is used.
-WARNINGS = YES
+WARNINGS = NO
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
# top of each HTML page. The value NO (the default) enables the index and
# directories like "/usr/src/myproject". Separate the files or directories
# with spaces.
-INPUT = ./
+INPUT = ../../ginac
# If the value of the INPUT tag contains directories, you can use the
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `html' will be used as the default path.
-HTML_OUTPUT = reference
+HTML_OUTPUT = .
# The HTML_HEADER tag can be used to specify a personal HTML header for
# each generated HTML page. If it is left blank doxygen will generate a
# each generated HTML page. If it is left blank doxygen will generate a
# standard footer.
-HTML_FOOTER = ./doc/Doxyfooter.html
+HTML_FOOTER = Doxyfooter
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
# files or namespaces will be aligned in HTML using tables. If set to
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `latex' will be used as the default path.
-LATEX_OUTPUT = latex
+LATEX_OUTPUT = .
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
# LaTeX documents. This may be useful for small projects and may help to
# If a relative path is entered, it will be relative to the location
# where doxygen was started. If left blank the current directory will be used.
-OUTPUT_DIRECTORY = ./doc
+OUTPUT_DIRECTORY = .
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
# documentation generated by doxygen is written. Doxygen will use this
# generated by doxygen. Possible values are YES and NO. If left blank
# NO is used.
-WARNINGS = YES
+WARNINGS = NO
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
# top of each HTML page. The value NO (the default) enables the index and
# directories like "/usr/src/myproject". Separate the files or directories
# with spaces.
-INPUT = ./
+INPUT = ../../ginac
# If the value of the INPUT tag contains directories, you can use the
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `html' will be used as the default path.
-HTML_OUTPUT = reference
+HTML_OUTPUT = .
# The HTML_HEADER tag can be used to specify a personal HTML header for
# each generated HTML page. If it is left blank doxygen will generate a
# each generated HTML page. If it is left blank doxygen will generate a
# standard footer.
-HTML_FOOTER = ./doc/Doxyfooter.html
+HTML_FOOTER = Doxyfooter
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
# files or namespaces will be aligned in HTML using tables. If set to
--- /dev/null
+## Process this file with automake to produce Makefile.in
+
+# This section produces HTML'ed and TeX'ed developer's reference from the
+# sources with a JavaDoc-like tool (in this case doxygen):
+index.html:
+ @if [ "${DOXYGEN}" ]; then \
+ echo "Running ${DOXYGEN} DoxyfileHTML..."; \
+ ${DOXYGEN} DoxyfileHTML; \
+ else \
+ echo "warning: target reference_html disabled by configuration"; \
+ fi
+
+latex::
+ @[ -d ${srcdir}/latex ] || mkdir ${srcdir}/latex >/dev/null 2>&1
+
+latex/reference.tex:
+ @if [ "${DOXYGEN}" ]; then \
+ echo "Running ${DOXYGEN} DoxyfileTEX..."; \
+ ${DOXYGEN} DoxyfileTEX; \
+ mv ${srcdir}/latex/refman.tex ${srcdir}/latex/reference.tex; \
+ else \
+ echo "warning: target reference.tex disabled by configuration"; \
+ fi
+
+latex/reference.dvi: latex/reference.tex
+ @if [ "${LATEX}" -a "${MAKEINDEX}" ]; then \
+ (cd ${srcdir}/latex; \
+ ${LATEX} reference.tex && \
+ ${MAKEINDEX} reference.idx && \
+ ${LATEX} reference.tex); \
+ else \
+ echo "warning: target reference.dvi disabled by configuration"; \
+ fi
+
+latex/reference.ps: latex/reference.dvi
+ @if [ "${DVIPS}" ]; then \
+ echo "Running ${DVIPS} -o reference.ps reference.dvi..."; \
+ (cd ${srcdir}/latex; ${DVIPS} -o reference.ps reference.dvi); \
+ else \
+ echo "warning: target reference.ps disabled by configuration"; \
+ fi
+
+reference.ps: latex latex/reference.ps
+ cp ${srcdir}/latex/reference.ps reference.ps
+
+install-data-local:
+ $(INSTALL_DATA) $(srcdir)/doxygen.css $(DESTDIR)$(ginacreferencedir)/doxygen.css
+ @for p in *.html; do \
+ echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginacreferencedir)/$$p"; \
+ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginacreferencedir)/$$p; \
+ done
+ @for p in *.gif; do \
+ echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginacreferencedir)/$$p"; \
+ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginacreferencedir)/$$p; \
+ done
+
+uninstall-local:
+ rm -f $(DESTDIR)$(ginacreferencedir)/doxygen.css
+ @for p in *.html; do \
+ echo " rm -f $(DESTDIR)$(ginacreferencedir)/$$p"; \
+ rm -f $(DESTDIR)$(ginacreferencedir)/$$p; \
+ done
+ @for p in *.gif; do \
+ echo " rm -f $(DESTDIR)$(ginacreferencedir)/$$p"; \
+ rm -f $(DESTDIR)$(ginacreferencedir)/$$p; \
+ done
+
+ginacdocdir = $(datadir)/doc/GiNaC
+ginacreferencedir = $(ginacdocdir)/reference
+ginacreference_DATA = $(REFERENCE_TARGETS)
+EXTRA_DATA = index.html reference.ps
+
+CLEANFILES = *.html *.gif doxygen.css *.ps latex/*
+EXTRA_DIST = DoxyfileHTML DoxyfileTEX Doxyfooter
--- /dev/null
+# Makefile.in generated automatically by automake 1.3 from Makefile.am
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# This section produces HTML'ed and TeX'ed developer's reference from the
+# sources with a JavaDoc-like tool (in this case doxygen):
+
+
+SHELL = /bin/sh
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DISTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+CC = @CC@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DOXYGEN = @DOXYGEN@
+DVIPS = @DVIPS@
+FIG2DEV = @FIG2DEV@
+GINACLIB_BINARY_AGE = @GINACLIB_BINARY_AGE@
+GINACLIB_INTERFACE_AGE = @GINACLIB_INTERFACE_AGE@
+GINACLIB_MAJOR_VERSION = @GINACLIB_MAJOR_VERSION@
+GINACLIB_MICRO_VERSION = @GINACLIB_MICRO_VERSION@
+GINACLIB_MINOR_VERSION = @GINACLIB_MINOR_VERSION@
+GINACLIB_VERSION = @GINACLIB_VERSION@
+JADE = @JADE@
+JADETEX = @JADETEX@
+LATEX = @LATEX@
+LD = @LD@
+LEX = @LEX@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LT_AGE = @LT_AGE@
+LT_CURRENT = @LT_CURRENT@
+LT_RELEASE = @LT_RELEASE@
+LT_REVISION = @LT_REVISION@
+MAINT = @MAINT@
+MAKEINDEX = @MAKEINDEX@
+MAKEINFO = @MAKEINFO@
+NM = @NM@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+REFERENCE_TARGETS = @REFERENCE_TARGETS@
+TUTORIAL_TARGETS = @TUTORIAL_TARGETS@
+VERSION = @VERSION@
+YACC = @YACC@
+
+ginacdocdir = $(datadir)/doc/GiNaC
+ginacreferencedir = $(ginacdocdir)/reference
+ginacreference_DATA = $(REFERENCE_TARGETS)
+EXTRA_DATA = index.html reference.ps
+
+CLEANFILES = *.html *.gif doxygen.css *.ps latex/*
+EXTRA_DIST = DoxyfileHTML DoxyfileTEX Doxyfooter
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = ../../config.h
+CONFIG_CLEAN_FILES =
+DATA = $(ginacreference_DATA)
+
+DIST_COMMON = Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP = --best
+all: Makefile $(DATA)
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/reference/Makefile
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+install-ginacreferenceDATA: $(ginacreference_DATA)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(ginacreferencedir)
+ @list='$(ginacreference_DATA)'; for p in $$list; do \
+ if test -f $(srcdir)/$$p; then \
+ echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginacreferencedir)/$$p"; \
+ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginacreferencedir)/$$p; \
+ else if test -f $$p; then \
+ echo " $(INSTALL_DATA) $$p $(DESTDIR)$(ginacreferencedir)/$$p"; \
+ $(INSTALL_DATA) $$p $(DESTDIR)$(ginacreferencedir)/$$p; \
+ fi; fi; \
+ done
+
+uninstall-ginacreferenceDATA:
+ @$(NORMAL_UNINSTALL)
+ list='$(ginacreference_DATA)'; for p in $$list; do \
+ rm -f $(DESTDIR)$(ginacreferencedir)/$$p; \
+ done
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = doc/reference
+
+distdir: $(DISTFILES)
+ here=`cd $(top_builddir) && pwd`; \
+ top_distdir=`cd $(top_distdir) && pwd`; \
+ distdir=`cd $(distdir) && pwd`; \
+ cd $(top_srcdir) \
+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/reference/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file; \
+ done
+info:
+dvi:
+check: all
+ $(MAKE)
+installcheck:
+install-exec:
+ @$(NORMAL_INSTALL)
+
+install-data: install-ginacreferenceDATA install-data-local
+ @$(NORMAL_INSTALL)
+
+install: install-exec install-data all
+ @:
+
+uninstall: uninstall-ginacreferenceDATA uninstall-local
+
+install-strip:
+ $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+installdirs:
+ $(mkinstalldirs) $(DATADIR)$(ginacreferencedir)
+
+
+mostlyclean-generic:
+ -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -rm -f Makefile $(DISTCLEANFILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+ -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+mostlyclean: mostlyclean-generic
+
+clean: clean-generic mostlyclean
+
+distclean: distclean-generic clean
+ -rm -f config.status
+ -rm -f libtool
+
+maintainer-clean: maintainer-clean-generic distclean
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+.PHONY: uninstall-ginacreferenceDATA install-ginacreferenceDATA tags \
+distdir info dvi installcheck install-exec install-data install \
+uninstall all installdirs mostlyclean-generic distclean-generic \
+clean-generic maintainer-clean-generic clean mostlyclean distclean \
+maintainer-clean
+
+
+index.html:
+ @if [ "${DOXYGEN}" ]; then \
+ echo "Running ${DOXYGEN} DoxyfileHTML..."; \
+ ${DOXYGEN} DoxyfileHTML; \
+ else \
+ echo "warning: target reference_html disabled by configuration"; \
+ fi
+
+latex::
+ @[ -d ${srcdir}/latex ] || mkdir ${srcdir}/latex >/dev/null 2>&1
+
+latex/reference.tex:
+ @if [ "${DOXYGEN}" ]; then \
+ echo "Running ${DOXYGEN} DoxyfileTEX..."; \
+ ${DOXYGEN} DoxyfileTEX; \
+ mv ${srcdir}/latex/refman.tex ${srcdir}/latex/reference.tex; \
+ else \
+ echo "warning: target reference.tex disabled by configuration"; \
+ fi
+
+latex/reference.dvi: latex/reference.tex
+ @if [ "${LATEX}" -a "${MAKEINDEX}" ]; then \
+ (cd ${srcdir}/latex; \
+ ${LATEX} reference.tex && \
+ ${MAKEINDEX} reference.idx && \
+ ${LATEX} reference.tex); \
+ else \
+ echo "warning: target reference.dvi disabled by configuration"; \
+ fi
+
+latex/reference.ps: latex/reference.dvi
+ @if [ "${DVIPS}" ]; then \
+ echo "Running ${DVIPS} -o reference.ps reference.dvi..."; \
+ (cd ${srcdir}/latex; ${DVIPS} -o reference.ps reference.dvi); \
+ else \
+ echo "warning: target reference.ps disabled by configuration"; \
+ fi
+
+reference.ps: latex latex/reference.ps
+ cp ${srcdir}/latex/reference.ps reference.ps
+
+install-data-local:
+ $(INSTALL_DATA) $(srcdir)/doxygen.css $(DESTDIR)$(ginacreferencedir)/doxygen.css
+ @for p in *.html; do \
+ echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginacreferencedir)/$$p"; \
+ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginacreferencedir)/$$p; \
+ done
+ @for p in *.gif; do \
+ echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginacreferencedir)/$$p"; \
+ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginacreferencedir)/$$p; \
+ done
+
+uninstall-local:
+ rm -f $(DESTDIR)$(ginacreferencedir)/doxygen.css
+ @for p in *.html; do \
+ echo " rm -f $(DESTDIR)$(ginacreferencedir)/$$p"; \
+ rm -f $(DESTDIR)$(ginacreferencedir)/$$p; \
+ done
+ @for p in *.gif; do \
+ echo " rm -f $(DESTDIR)$(ginacreferencedir)/$$p"; \
+ rm -f $(DESTDIR)$(ginacreferencedir)/$$p; \
+ done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+## Process this file with automake to produce Makefile.in
+
+# This section produces HTML'ed and TeX'ed versions of the tutorial using a
+# SGML to TeX converter (in this case jade). As a dirty hack, we are doing
+# some regexpese to tutorial.sgml prior to parsing it, in order to allow for
+# different graphics output. This seems to be an ugly limitation of docbook...
+
+FIG = classhierarchy.fig rep_naive.fig rep_pair.fig
+PNG = $(addsuffix .png, $(basename $(FIG)))
+EPS = $(addsuffix .eps, $(basename $(FIG)))
+
+SUFFIXES = .fig .png .eps
+
+%.eps: %.fig
+ @if [ "${FIG2DEV}" ]; then \
+ echo "Running ${FIG2DEV} -L ps -m 0.8 $< $@..."; \
+ ${FIG2DEV} -L ps -m 0.8 $< $@; \
+ else \
+ echo "warning: fig2dev was not found by configure"; \
+ fi
+
+%.png: %.fig
+ @if [ "${FIG2DEV}" ]; then \
+ echo "Running ${FIG2DEV} -L png $< $@..."; \
+ ${FIG2DEV} -L png $< $@; \
+ else \
+ echo "warning: fig2dev was not found by configure"; \
+ fi
+
+JADEARGS_TEX = -t tex -o tutorial.tex -d /usr/lib/sgml/stylesheet/dsssl/docbook/nwalsh/print/docbook.dsl
+JADEARGS_HTML = -t sgml -d /usr/lib/sgml/stylesheet/dsssl/docbook/nwalsh/html/docbook.dsl
+
+index.html: tutorial.sgml.in $(PNG)
+ @if [ "${JADE}" ]; then \
+ sed -e 's/graext/png/g' -e 's/GRAEXT/GIF/g' tutorial.sgml.in > tutorial.sgml; \
+ echo "Running ${JADE} ${JADEARGS_HTML} tutorial.sgml..."; \
+ ${JADE} ${JADEARGS_HTML} tutorial.sgml; \
+ if [ -f book1.html ]; then mv book1.html index.html; fi; \
+ else \
+ echo "warning: target tutorial_html disabled by configuration"; \
+ fi
+
+tutorial.tex: tutorial.sgml.in $(EPS)
+ @if [ "${JADE}" -a "${LATEX}" ]; then \
+ sed -e 's/graext/eps/g' -e 's/GRAEXT/EPS/g' tutorial.sgml.in > tutorial.sgml; \
+ echo "Running ${JADE} ${JADEARGS_TEX} tutorial.sgml..."; \
+ ${JADE} ${JADEARGS_TEX} tutorial.sgml ; \
+ else \
+ echo "warning: target tutorial.tex disabled by configuration"; \
+ fi
+
+tutorial.dvi: tutorial.tex
+ @if [ "${JADETEX}" ]; then \
+ echo "Running ${JADETEX} tutorial.tex..."; \
+ ${JADETEX} tutorial.tex && ${JADETEX} tutorial.tex && ${JADETEX} tutorial.tex; \
+ else \
+ echo "warning: target tutorial.dvi disabled by configuration"; \
+ fi
+
+tutorial.ps: tutorial.dvi
+ @if [ "${DVIPS}" ]; then \
+ echo "Running ${DVIPS} tutorial.dvi -o tutorial.ps..."; \
+ ${DVIPS} tutorial.dvi -o tutorial.ps; \
+ else \
+ echo "warning: target tutorial.ps disabled by configuration"; \
+ fi
+
+install-data-local:
+ @for p in *.html; do \
+ echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginactutorialdir)/$$p"; \
+ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginactutorialdir)/$$p; \
+ done
+ @for p in *.png; do \
+ echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginactutorialdir)/$$p"; \
+ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginactutorialdir)/$$p; \
+ done
+
+uninstall-local:
+ @for p in *.html; do \
+ echo " rm -f $(DESTDIR)$(ginactutorialdir)/$$p"; \
+ rm -f $(DESTDIR)$(ginactutorialdir)/$$p; \
+ done
+ @for p in *.png; do \
+ echo " rm -f $(DESTDIR)$(ginactutorialdir)/$$p"; \
+ rm -f $(DESTDIR)$(ginactutorialdir)/$$p; \
+ done
+
+ginacdocdir = $(datadir)/doc/GiNaC
+ginactutorialdir = $(ginacdocdir)/tutorial
+ginactutorial_DATA = $(TUTORIAL_TARGETS)
+EXTRA_DATA = index.html tutorial.ps
+
+CLEANFILES = *.html *.png *.ps latex tutorial.sgml HTML.manifest
+EXTRA_DIST = tutorial.sgml.in $(FIG)
--- /dev/null
+# Makefile.in generated automatically by automake 1.3 from Makefile.am
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# This section produces HTML'ed and TeX'ed versions of the tutorial using a
+# SGML to TeX converter (in this case jade). As a dirty hack, we are doing
+# some regexpese to tutorial.sgml prior to parsing it, in order to allow for
+# different graphics output. This seems to be an ugly limitation of docbook...
+
+
+SHELL = /bin/sh
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DISTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+CC = @CC@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DOXYGEN = @DOXYGEN@
+DVIPS = @DVIPS@
+FIG2DEV = @FIG2DEV@
+GINACLIB_BINARY_AGE = @GINACLIB_BINARY_AGE@
+GINACLIB_INTERFACE_AGE = @GINACLIB_INTERFACE_AGE@
+GINACLIB_MAJOR_VERSION = @GINACLIB_MAJOR_VERSION@
+GINACLIB_MICRO_VERSION = @GINACLIB_MICRO_VERSION@
+GINACLIB_MINOR_VERSION = @GINACLIB_MINOR_VERSION@
+GINACLIB_VERSION = @GINACLIB_VERSION@
+JADE = @JADE@
+JADETEX = @JADETEX@
+LATEX = @LATEX@
+LD = @LD@
+LEX = @LEX@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LT_AGE = @LT_AGE@
+LT_CURRENT = @LT_CURRENT@
+LT_RELEASE = @LT_RELEASE@
+LT_REVISION = @LT_REVISION@
+MAINT = @MAINT@
+MAKEINDEX = @MAKEINDEX@
+MAKEINFO = @MAKEINFO@
+NM = @NM@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+REFERENCE_TARGETS = @REFERENCE_TARGETS@
+TUTORIAL_TARGETS = @TUTORIAL_TARGETS@
+VERSION = @VERSION@
+YACC = @YACC@
+
+FIG = classhierarchy.fig rep_naive.fig rep_pair.fig
+PNG = $(addsuffix .png, $(basename $(FIG)))
+EPS = $(addsuffix .eps, $(basename $(FIG)))
+
+SUFFIXES = .fig .png .eps
+
+JADEARGS_TEX = -t tex -o tutorial.tex -d /usr/lib/sgml/stylesheet/dsssl/docbook/nwalsh/print/docbook.dsl
+JADEARGS_HTML = -t sgml -d /usr/lib/sgml/stylesheet/dsssl/docbook/nwalsh/html/docbook.dsl
+
+ginacdocdir = $(datadir)/doc/GiNaC
+ginactutorialdir = $(ginacdocdir)/tutorial
+ginactutorial_DATA = $(TUTORIAL_TARGETS)
+EXTRA_DATA = index.html tutorial.ps
+
+CLEANFILES = *.html *.png *.ps latex tutorial.sgml HTML.manifest
+EXTRA_DIST = tutorial.sgml.in $(FIG)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = ../../config.h
+CONFIG_CLEAN_FILES =
+DATA = $(ginactutorial_DATA)
+
+DIST_COMMON = Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP = --best
+all: Makefile $(DATA)
+
+.SUFFIXES:
+.SUFFIXES: .eps .fig .png
+$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/tutorial/Makefile
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+install-ginactutorialDATA: $(ginactutorial_DATA)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(ginactutorialdir)
+ @list='$(ginactutorial_DATA)'; for p in $$list; do \
+ if test -f $(srcdir)/$$p; then \
+ echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginactutorialdir)/$$p"; \
+ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginactutorialdir)/$$p; \
+ else if test -f $$p; then \
+ echo " $(INSTALL_DATA) $$p $(DESTDIR)$(ginactutorialdir)/$$p"; \
+ $(INSTALL_DATA) $$p $(DESTDIR)$(ginactutorialdir)/$$p; \
+ fi; fi; \
+ done
+
+uninstall-ginactutorialDATA:
+ @$(NORMAL_UNINSTALL)
+ list='$(ginactutorial_DATA)'; for p in $$list; do \
+ rm -f $(DESTDIR)$(ginactutorialdir)/$$p; \
+ done
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = doc/tutorial
+
+distdir: $(DISTFILES)
+ here=`cd $(top_builddir) && pwd`; \
+ top_distdir=`cd $(top_distdir) && pwd`; \
+ distdir=`cd $(distdir) && pwd`; \
+ cd $(top_srcdir) \
+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/tutorial/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file; \
+ done
+info:
+dvi:
+check: all
+ $(MAKE)
+installcheck:
+install-exec:
+ @$(NORMAL_INSTALL)
+
+install-data: install-ginactutorialDATA install-data-local
+ @$(NORMAL_INSTALL)
+
+install: install-exec install-data all
+ @:
+
+uninstall: uninstall-ginactutorialDATA uninstall-local
+
+install-strip:
+ $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+installdirs:
+ $(mkinstalldirs) $(DATADIR)$(ginactutorialdir)
+
+
+mostlyclean-generic:
+ -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -rm -f Makefile $(DISTCLEANFILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+ -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+mostlyclean: mostlyclean-generic
+
+clean: clean-generic mostlyclean
+
+distclean: distclean-generic clean
+ -rm -f config.status
+ -rm -f libtool
+
+maintainer-clean: maintainer-clean-generic distclean
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+.PHONY: uninstall-ginactutorialDATA install-ginactutorialDATA tags \
+distdir info dvi installcheck install-exec install-data install \
+uninstall all installdirs mostlyclean-generic distclean-generic \
+clean-generic maintainer-clean-generic clean mostlyclean distclean \
+maintainer-clean
+
+
+%.eps: %.fig
+ @if [ "${FIG2DEV}" ]; then \
+ echo "Running ${FIG2DEV} -L ps -m 0.8 $< $@..."; \
+ ${FIG2DEV} -L ps -m 0.8 $< $@; \
+ else \
+ echo "warning: fig2dev was not found by configure"; \
+ fi
+
+%.png: %.fig
+ @if [ "${FIG2DEV}" ]; then \
+ echo "Running ${FIG2DEV} -L png $< $@..."; \
+ ${FIG2DEV} -L png $< $@; \
+ else \
+ echo "warning: fig2dev was not found by configure"; \
+ fi
+
+index.html: tutorial.sgml.in $(PNG)
+ @if [ "${JADE}" ]; then \
+ sed -e 's/graext/png/g' -e 's/GRAEXT/GIF/g' tutorial.sgml.in > tutorial.sgml; \
+ echo "Running ${JADE} ${JADEARGS_HTML} tutorial.sgml..."; \
+ ${JADE} ${JADEARGS_HTML} tutorial.sgml; \
+ if [ -f book1.html ]; then mv book1.html index.html; fi; \
+ else \
+ echo "warning: target tutorial_html disabled by configuration"; \
+ fi
+
+tutorial.tex: tutorial.sgml.in $(EPS)
+ @if [ "${JADE}" -a "${LATEX}" ]; then \
+ sed -e 's/graext/eps/g' -e 's/GRAEXT/EPS/g' tutorial.sgml.in > tutorial.sgml; \
+ echo "Running ${JADE} ${JADEARGS_TEX} tutorial.sgml..."; \
+ ${JADE} ${JADEARGS_TEX} tutorial.sgml ; \
+ else \
+ echo "warning: target tutorial.tex disabled by configuration"; \
+ fi
+
+tutorial.dvi: tutorial.tex
+ @if [ "${JADETEX}" ]; then \
+ echo "Running ${JADETEX} tutorial.tex..."; \
+ ${JADETEX} tutorial.tex && ${JADETEX} tutorial.tex && ${JADETEX} tutorial.tex; \
+ else \
+ echo "warning: target tutorial.dvi disabled by configuration"; \
+ fi
+
+tutorial.ps: tutorial.dvi
+ @if [ "${DVIPS}" ]; then \
+ echo "Running ${DVIPS} tutorial.dvi -o tutorial.ps..."; \
+ ${DVIPS} tutorial.dvi -o tutorial.ps; \
+ else \
+ echo "warning: target tutorial.ps disabled by configuration"; \
+ fi
+
+install-data-local:
+ @for p in *.html; do \
+ echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginactutorialdir)/$$p"; \
+ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginactutorialdir)/$$p; \
+ done
+ @for p in *.png; do \
+ echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginactutorialdir)/$$p"; \
+ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginactutorialdir)/$$p; \
+ done
+
+uninstall-local:
+ @for p in *.html; do \
+ echo " rm -f $(DESTDIR)$(ginactutorialdir)/$$p"; \
+ rm -f $(DESTDIR)$(ginactutorialdir)/$$p; \
+ done
+ @for p in *.png; do \
+ echo " rm -f $(DESTDIR)$(ginactutorialdir)/$$p"; \
+ rm -f $(DESTDIR)$(ginactutorialdir)/$$p; \
+ done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
NM = @NM@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
+REFERENCE_TARGETS = @REFERENCE_TARGETS@
+TUTORIAL_TARGETS = @TUTORIAL_TARGETS@
VERSION = @VERSION@
YACC = @YACC@
NM = @NM@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
+REFERENCE_TARGETS = @REFERENCE_TARGETS@
+TUTORIAL_TARGETS = @TUTORIAL_TARGETS@
VERSION = @VERSION@
YACC = @YACC@