configure problem
richard noel fell
fell at shore.net
Fri Feb 16 20:16:41 CET 2001
I did as you said and exported LD_LIBRARY_PATH, but still the same problem. I am
attaching the config.log. Sorry to be such a bother.
Dick Fell
"Richard B. Kreckel" wrote:
> On Fri, 16 Feb 2001, richard noel fell wrote:
> > Thanks for the reply. Unfortuately, your suggestions did not help. The same
> > error message appeared. Darn.
>
> Hmm, the message implies that it found the headers and compiled the test
> program, but could not run it. Please study config.log. My guess is
> that at runtime it doesn't find the shared lib. Please export
> LD_LIBRARY_PATH so it points to the dir where libcln.so is sitting.
>
> > Dick Fell
> >
> > Tilman Utz wrote:
> >
> > > Just a guess: did you set compiler flags?
> > > I set:
> > > export CPPFLAGS=-I/usr/local/include
> > > export CXXFLAGS=-I/usr/local/include
> > > export LDFLAGS=-L/usr/local/lib
> > > I work on cygwin (probably different from you), but this worked on a similar
> > > errormessage.
> > >
> > > regards Tilman
> > >
> > > richard noel fell schrieb:
> > >
> > > > am attempting to install ginac on redhat 7.0. First step, get cln-1.1,
> > > > and unzip, untar, etc. This resulted in a directory cln-1.1 being
> > > > created. From there, I ran ./configure, make, make check and make
> > > > install. Everything seemed to go fine since there were no error
> > > > messages.
> > > > Next step. Go to my GiNac-0.7.1 directory and run ./configure. Here is
> > > > the relevant error message.
> > > >
> > > > <snip lots of stuff>
> > > > checking for cln-config... /usr/local/bin/cln-config
> > > > checking for CLN - version >= 1.1.0... no
> > > > *** Could not run CLN test program, checking why...
> > > > *** The test program compiled, but did not run. This usually means
> > > > *** that the run-time linker is not finding CLN or finding the wrong
> > > > *** version of CLN. If it is not finding CLN, you'll need to set your
> > > > *** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to
> > > > point
> > > > *** to the installed location Also, make sure you have run ldconfig if
> > > > that
> > > > *** is required on your system.
> > > > <snip more stuff>
> > > > **** The following problems have been detected by configure.
> > > > **** Please check the messages below before running "make".
> > > > **** (see the section 'Common Problems' in the INSTALL file)
> > > >
> > > > ** No suitable installed version of CLN could be found.
> > > >
> > > > Chances are a most naive error on my part. From the error messages, it
> > > > appears that the configure script is not looking in the correct
> > > > directory(ies). And since I got cln from its web site, I assume it is
> > > > the appropriate version. Perhaps I am wrong? Any help is greatly
> > > > appreciated.
> > > > Thanks,
> > > > Dick Fell
> > > >
> > > > -
> > > > To UNSUBSCRIBE, email to ginac-list at ginac.de with a subject of "unsubscribe".
> > >
> > > -
> > > To UNSUBSCRIBE, email to ginac-list at ginac.de with a subject of "unsubscribe".
> >
> > -
> > To UNSUBSCRIBE, email to ginac-list at ginac.de with a subject of "unsubscribe".
> >
>
> --
> Richard Kreckel
> <Richard.Kreckel at Uni-Mainz.DE>
> <http://wwwthep.physik.uni-mainz.de/~kreckel/>
>
> -
> To UNSUBSCRIBE, email to ginac-list at ginac.de with a subject of "unsubscribe".
-------------- next part --------------
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
configure:623: checking for a BSD compatible install
configure:676: checking whether build environment is sane
configure:733: checking whether make sets ${MAKE}
configure:779: checking for working aclocal
configure:792: checking for working autoconf
configure:805: checking for working automake
configure:818: checking for working autoheader
configure:831: checking for working makeinfo
configure:850: checking for c++
configure:882: checking whether the C++ compiler (c++ -I/usr/local/include -L/usr/local/lib) works
configure:898: c++ -o conftest -I/usr/local/include -I/usr/local/include -L/usr/local/lib conftest.C 1>&5
configure:924: checking whether the C++ compiler (c++ -I/usr/local/include -L/usr/local/lib) is a cross-compiler
configure:929: checking whether we are using GNU C++
configure:938: c++ -E conftest.C
configure:957: checking whether c++ accepts -g
configure:989: checking how to run the C++ preprocessor
configure:1007: c++ -E -I/usr/local/include conftest.C >/dev/null 2>conftest.out
configure:1043: checking for a BSD compatible install
configure:1171: checking host system type
configure:1192: checking build system type
configure:1212: checking for ranlib
configure:1242: checking for gcc
configure:1355: checking whether the C compiler (gcc -L/usr/local/lib) works
configure:1371: gcc -o conftest -I/usr/local/include -L/usr/local/lib conftest.c 1>&5
configure:1397: checking whether the C compiler (gcc -L/usr/local/lib) is a cross-compiler
configure:1402: checking whether we are using GNU C
configure:1411: gcc -E conftest.c
configure:1430: checking whether gcc accepts -g
configure:1473: checking for ld used by GCC
configure:1536: checking if the linker (/usr/bin/ld) is GNU ld
GNU ld version 2.10.90 (with BFD 2.10.0.18)
configure:1552: checking for BSD-compatible nm
configure:1589: checking whether ln -s works
ltconfig:603: checking for object suffix
ltconfig:604: gcc -c -g -O2 -I/usr/local/include conftest.c 1>&5
ltconfig:629: checking for executable suffix
ltconfig:630: gcc -o conftest -g -O2 -I/usr/local/include -L/usr/local/lib conftest.c 1>&5
ltconfig:776: checking if gcc PIC flag -fPIC works
ltconfig:777: gcc -c -g -O2 -fPIC -DPIC -I/usr/local/include conftest.c 1>&5
ltconfig:829: checking if gcc supports -c -o file.o
ltconfig:830: gcc -c -g -O2 -o out/conftest2.o -I/usr/local/include conftest.c 1>&5
ltconfig:862: checking if gcc supports -c -o file.lo
ltconfig:863: gcc -c -g -O2 -c -o conftest.lo -I/usr/local/include conftest.c 1>&5
ltconfig:914: checking if gcc supports -fno-rtti -fno-exceptions
ltconfig:915: gcc -c -g -O2 -fno-rtti -fno-exceptions -c conftest.c -I/usr/local/include conftest.c 1>&5
ltconfig:958: checking if gcc static flag -static works
ltconfig:959: gcc -o conftest -g -O2 -I/usr/local/include -L/usr/local/lib -static conftest.c 1>&5
GNU ld version 2.10.90 (with BFD 2.10.0.18)
ltconfig:1653: checking if global_symbol_pipe works
ltconfig:1654: gcc -c -g -O2 -I/usr/local/include conftest.c 1>&5
ltconfig:1657: eval "/usr/bin/nm -B conftest.o | sed -n -e 's/^.*[ ]\([ABCDGISTW]\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' > conftest.nm"
ltconfig:1709: gcc -o conftest -g -O2 -fno-builtin -fno-rtti -fno-exceptions -I/usr/local/include -L/usr/local/lib conftest.c conftstm.o 1>&5
configure:1784: checking how to run the C preprocessor
configure:1805: gcc -E -I/usr/local/include conftest.c >/dev/null 2>conftest.out
configure:1869: checking for flex
configure:1902: checking for flex
configure:1936: checking for yywrap in -lfl
configure:1955: gcc -o conftest -g -O2 -I/usr/local/include -L/usr/local/lib conftest.c -lfl 1>&5
configure:1978: checking lex output file root
configure:1999: checking whether yytext is a pointer
configure:2018: gcc -o conftest -g -O2 -I/usr/local/include -L/usr/local/lib conftest.c -lfl 1>&5
configure:2044: checking for bison
configure:2093: checking size of long
configure:2112: gcc -o conftest -g -O2 -I/usr/local/include -L/usr/local/lib conftest.c 1>&5
configure:2132: checking size of long long
configure:2151: gcc -o conftest -g -O2 -I/usr/local/include -L/usr/local/lib conftest.c 1>&5
configure:2171: checking size of long double
configure:2190: gcc -o conftest -g -O2 -I/usr/local/include -L/usr/local/lib conftest.c 1>&5
configure:2222: checking for unistd.h
configure:2232: c++ -E -I/usr/local/include conftest.C >/dev/null 2>conftest.out
configure:2262: checking for readline/readline.h
configure:2272: c++ -E -I/usr/local/include conftest.C >/dev/null 2>conftest.out
configure:2262: checking for readline/history.h
configure:2272: c++ -E -I/usr/local/include conftest.C >/dev/null 2>conftest.out
configure:2309: checking for tgetent
configure:2340: c++ -o conftest -I/usr/local/include -I/usr/local/include -L/usr/local/lib conftest.C 1>&5
/tmp/ccoAmJwf.o: In function `main':
/tmp/ccoAmJwf.o(.text+0x7): undefined reference to `tgetent'
collect2: ld returned 1 exit status
configure: failed program was:
#line 2314 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char tgetent(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char tgetent();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_tgetent) || defined (__stub___tgetent)
choke me
#else
tgetent();
#endif
; return 0; }
configure:2368: checking for tgetent in -lncurses
configure:2390: c++ -o conftest -I/usr/local/include -I/usr/local/include -L/usr/local/lib conftest.C -lncurses 1>&5
configure:2461: checking for readline in -lreadline
configure:2483: c++ -o conftest -I/usr/local/include -I/usr/local/include -L/usr/local/lib conftest.C -lreadline -lncurses 1>&5
configure:2525: checking for iostream
configure:2535: c++ -E -I/usr/local/include conftest.C >/dev/null 2>conftest.out
configure:2525: checking for vector
configure:2535: c++ -E -I/usr/local/include conftest.C >/dev/null 2>conftest.out
configure:2525: checking for map
configure:2535: c++ -E -I/usr/local/include conftest.C >/dev/null 2>conftest.out
configure:2525: checking for string
configure:2535: c++ -E -I/usr/local/include conftest.C >/dev/null 2>conftest.out
configure:2525: checking for list
configure:2535: c++ -E -I/usr/local/include conftest.C >/dev/null 2>conftest.out
configure:2525: checking for typeinfo
configure:2535: c++ -E -I/usr/local/include conftest.C >/dev/null 2>conftest.out
configure:2525: checking for iterator
configure:2535: c++ -E -I/usr/local/include conftest.C >/dev/null 2>conftest.out
configure:2525: checking for stdexcept
configure:2535: c++ -E -I/usr/local/include conftest.C >/dev/null 2>conftest.out
configure:2525: checking for algorithm
configure:2535: c++ -E -I/usr/local/include conftest.C >/dev/null 2>conftest.out
configure:2566: checking for sstream
configure:2576: c++ -E -I/usr/local/include conftest.C >/dev/null 2>conftest.out
configure:2566: checking for strstream
configure:2576: c++ -E -I/usr/local/include conftest.C >/dev/null 2>conftest.out
configure:2644: checking for cln-config
configure:2679: checking for CLN - version >= 1.1.0
configure:2775: c++ -o conftest -I/usr/local/include -I/usr/local/include -I/usr/local/include -L/usr/local/lib conftest.C -L/usr/local/lib -lcln -lgmp 1>&5
configure: failed program was:
#line 2732 "configure"
#include "confdefs.h"
#ifdef __cplusplus
extern "C" void exit(int);
#endif
#include <stdio.h>
#include <string.h>
#include <cln/version.h>
/* we do not #include <stdlib.h> because autoconf in C++ mode inserts a
prototype for exit() that conflicts with the one in stdlib.h */
extern "C" int system(const char *);
int main(void)
{
int major, minor, micro;
char *tmp_version;
system("touch conf.clntest");
if ((CL_VERSION_MAJOR != 1) ||
(CL_VERSION_MINOR != 1) ||
(CL_VERSION_PATCHLEVEL != 0)) {
printf("\n*** 'cln-config --version' returned %d.%d.%d, but the header file I found\n", 1, 1, 0);
printf("*** corresponds to %d.%d.%d. This mismatch suggests your installation of CLN\n", CL_VERSION_MAJOR, CL_VERSION_MINOR, CL_VERSION_PATCHLEVEL);
printf("*** is corrupted or you have specified some wrong -I compiler flags.\n");
printf("*** Please inquire and consider reinstalling CLN.\n");
return 1;
}
if ((cln::version_major != 1) ||
(cln::version_minor != 1) ||
(cln::version_patchlevel != 0)) {
printf("\n*** 'cln-config --version' returned %d.%d.%d, but the library I found\n", 1, 1, 0);
printf("*** corresponds to %d.%d.%d. This mismatch suggests your installation of CLN\n", cln::version_major, cln::version_minor, cln::version_patchlevel);
printf("*** is corrupted or you have specified some wrong -L compiler flags.\n");
printf("*** Please inquire and consider reinstalling CLN.\n");
return 1;
}
return 0;
}
configure:2813: c++ -o conftest -I/usr/local/include -g -O2 -I/usr/local/include -L/usr/local/lib conftest.C -L/usr/local/lib -lcln -lgmp 1>&5
configure:2857: checking for doxygen
configure:2893: checking for latex
configure:2929: checking for makeindex
configure:2965: checking for dvips
configure:3001: checking for fig2dev
More information about the GiNaC-list
mailing list